Salon service duration, buffers and staff hours
By LUXNOUS · Magyar
A booking calendar needs enough time for the treatment, the work that follows it and the right team member's availability. Before opening online bookings, check those three settings together. A 60-minute service followed by 10 minutes of cleanup needs a 70-minute space in that staff member's working day.
This guide gives you a worksheet and a sample schedule to check your settings. Every time and service in the examples is fictional. Use your own treatment requirements and observed timings when setting up your salon.
Separate treatment time from the time between clients
Write down what happens from the start of one appointment until you are ready for the next client. Distinguish these parts:
| Part of the appointment | What it means | Example |
|---|---|---|
| Active service | The professional is working with the client | Applying a treatment |
| Processing time | A treatment is developing and may not require continuous staff attention | A suitable colour-development stage |
| Finishing time | The professional returns to complete the service | Rinsing and finishing |
| Buffer time | The professional remains unavailable after the client-facing work | Cleaning and preparing the station |
Processing time is only potentially reusable. The treatment protocol, supervision needs and available equipment still matter. Do not treat every waiting period as permission to accept another client.
Scheduling products also use these terms differently. For example, Treatwell's documentation describes buffer time as unavailable time added around bookings and explains how it can prevent a late-day slot from appearing. Check your system's actual behaviour rather than relying on the label. Source: Treatwell Expert Support.
Build a timing worksheet for each bookable option
Start with the services you offer most often. If short and long hair, removal work or another treatment option changes the time needed, record that difference explicitly.
| Service or option | Active work | Processing | Finishing | Cleanup buffer | Start-to-ready time |
|---|---|---|---|---|---|
| Example A | 45 min | 0 min | 0 min | 10 min | 55 min |
| Example B | 30 min | 30 min | 20 min | 10 min | 90 min |
| Your service | ___ | ___ | ___ | ___ | ___ |
These are calculation examples, not recommended treatment durations. For Example B, a 09:00 start means active work until 09:30, processing until 10:00, finishing until 10:20 and cleanup until 10:30. The full sequence lasts 90 minutes, even though the professional is not continuously occupied during processing.
Review several ordinary appointments before choosing your figures. Note where the work regularly runs over, and whether the difference comes from a bookable option or an unrealistic default. Do not shorten timings simply to make more slots appear.
Check staff hours as well as salon opening hours
A salon can be open while a particular professional is unavailable. Check the person's working hours, planned breaks, absences, existing appointments and eligibility to perform the selected service.
Use a simple example: the salon closes at 18:00, but one professional finishes at 17:00. A service needing 60 minutes plus 10 minutes of cleanup must fit before 17:00 for that person. A 16:00 start would run until 17:10 and should fail that requirement.
Also check the exact service option and staff member. A time that fits a shorter option may not fit a longer one. Where staff-specific durations exist, test the duration applied to the selected professional.
Run five checks before sharing your booking page
Use an isolated demo calendar with fictional details. Keep client-facing bookings closed while testing any setup that could create real appointments.
| Check | Example | Required result |
|---|---|---|
| Back-to-back appointments | 60-minute service at 09:00, then 10-minute cleanup | The same person cannot start the next client at 10:00 |
| End of shift | Staff finishes at 17:00; total requirement is 70 minutes | A 16:00 start is unavailable |
| Longer service option | Change from a 45-minute option to a 60-minute option | Availability is checked again using the longer duration |
| Staff selection | One person is busy; another is free and eligible | Availability reflects the selected person |
| Processing stage | A service contains a gap followed by finishing work | Finishing time remains protected; suggested slots are checked separately |
Record the expected result, what the calendar actually offers and any correction needed. A screenshot of an apparently empty calendar is insufficient: the selected service, person and date determine whether a slot is usable.
How this relates to LUXNOUS
LUXNOUS uses service duration, staff availability and confirmed appointments when checking bookings. Its service model distinguishes processing time, finishing time and a cleanup buffer. Duration can also depend on the service option and staff-specific settings.
There is an important distinction when testing processing gaps: LUXNOUS's suggested-slot generation conservatively requires room for the full service sequence. A direct availability check can account for a processing gap, while the suggestions do not attempt to fill every such gap. Do not assume that every theoretically possible start will appear automatically.
After changing a duration or extra-time setting, review affected future appointments and check the booking page again. In LUXNOUS, availability calculations use current service extra-time settings, so a change can affect how existing appointments block the calendar.
See the LUXNOUS salon workflow before deciding whether it fits your setup. Check current plans and prices before subscribing.
Keep the worksheet with your setup notes
Recheck timings when you introduce a service option, change a treatment sequence or adjust a team member's schedule. Use the worksheet to explain the change to the team, then repeat the relevant calendar checks.
If you are still preparing to open, continue with the salon opening and online booking checklist. If you are comparing systems, use the working-day booking software test.
Prepared by LUXNOUS with AI assistance. Examples are fictional; this is not a customer case study or a report of measured results.